At this time we’re going to make a DIY starburst mirror from wooden shims. I’m additionally going to share with you a brilliant straightforward solution to get a distressed seaside paint end on nearly any floor. This one is ideal for a seaside or lake home or only a lavatory that wants a beachy vibe.
Provides wanted to make this DIY starburst mirror:
Some hyperlinks beneath could also be affiliate hyperlinks which signifies that you don’t pay anymore, nonetheless, I’ll earn a fee out of your buy.
- Wooden shims in two lengths (out there at your native dwelling enchancment retailer)
- Wooden plate (roughly the dimensions of your mirror)
- Coastal Paint
- Palette knives
- Scorching glue and glue gun
The key to that worn seaside paint is a product referred to as Coastal Paint. This thick paint will provide you with a country and worn look in simply minutes. You’ll be able to truly see me portray a few of these shims reside within the video beneath.
Can’t watch the video or missed a few of the steps? The paint is very easy to make use of! Apply the teal colour first with a palette knife. Carry barely with the again of your knife on the floor to create peaks and valleys. Then put aside and permit to dry. As soon as nearly dry, smear on white paint with a palette knife. Don’t cowl the entire teal with the white. Depart gaps within the paint. Once more you’ll want to carry with the again of the palette knife to create these peaks and valleys. Put aside and permit to dry utterly.
You will want to repeat this whole course of on each single shim. Every one will probably be totally different however that provides to the look of this DIY starburst mirror! As soon as all the pieces is dry, begin laying out the shims to see how they will match round your mirror. Additionally, you will must ensure you have sufficient.
As soon as all the pieces is totally dry, begin with the shorter shims and switch all the pieces over to the again aspect. Use scorching glue to safe the shims across the outer fringe of the plate.
Use extra scorching glue so as to add a brief piece of rope to the again of your undertaking for hanging.
Then add the longer shims to the mirror within the hole that’s created by the shorter shims. Once more use scorching glue to safe. Sure you will use a BUNCH of scorching glue however it can all be value it in the long run.
It would be best to use extra scorching glue to safe all the pieces into place.
I even added some between every shim as proven beneath.
It would be best to let the glue cool utterly then you’ll be able to flip the undertaking over to the entrance.
Add your mirror into place with scorching glue. Then cowl up the perimeters with some rope and sure….extra scorching glue!
Proceed including rope till you might be proud of the outcomes.
Then cling your DIY starburst mirror in any room of your property. It undoubtedly provides that coastal vibe, don’t you assume?
Seize your paint and get began by yourself model of this mirror. You’ll love the way it seems!
So, do you like this DIY starburst mirror and wish extra concepts? Attempt the hyperlinks beneath.
Success! Now examine your e mail to substantiate your subscription.