Some hyperlinks under could also be affiliate hyperlinks which signifies that you don’t pay anymore, nevertheless, a small fee will go to assist this website.
What’s the Cricut engraving instrument?
The engraving instrument is unique to the Cricut Maker and makes use of the QuickSwap housing. It has a pointy and pointed metallic tip that enables it to engrave in quite a lot of supplies.
As you’ll be able to see, the tip is sharp and is ready to actually dig into your materials.
The tip itself matches on the identical QuickSwap housing because the scoring wheel and the opposite new instruments in Cricut Maker line up. You may see that this one has a “41” engraved on the aspect to tell apart it from the opposite instruments. Wish to see how the QuickSwap housing works? Head right here for a brief video! You should buy the Cricut engraving tip by itself right here or with a housing right here. Keep in mind that you solely want one housing and it’ll work with as many suggestions as you want to.
Placing the Engraving Device within the Cricut Maker
You will want so as to add the engraving tip to the QuickSwap housing first. Then you’ll be able to simply put the blade into the reducing aspect of your machine.
Your pc or cell gadget will then immediate you to alter to a reducing instrument when wanted.
Cricut Engrave Tip Video
Wish to simply see the whole lot you ever wished to know concerning the engraving tip on a video? Simply watch under! That is additionally the one place the place I’ve an outline of easy methods to change to engraving strains in Cricut Design House so make sure to watch.
Can’t watch the video or missed among the steps? Simply maintain studying!
Cricut Deboss Versus Engraving Tip
You may see the 2 suggestions within the picture under. There’s a BIG distinction in what they will do. I might be evaluating them on a number of of the supplies under so you’ll be able to maintain studying. Nonetheless, I believe your selection relies on what kind of crafter you might be. So, begin by considering of what supplies you wish to work with then maintain studying. I’ll have some remaining ideas on this debate on the backside of this submit as properly.
What supplies are you able to engrave in your Cricut Maker?
You would possibly wish to know what supplies the Cricut engraving instrument is suitable with. Right here is your complete record from the Cricut web site:
- Acetate (together with the foil model)
- Aluminum Sheets (0.5 mm)
- Fake Leather-based (Paper Skinny)
- Foil Holographic Kraft Board – Neon
- Foil Poster Board
- Garment Leather-based 2-Three oz. (0.eight mm)
- Real Leather-based
- Glitter Cardstock
- Heavy Watercolor Paper – 140 lb (300 gsm)
- Kraft Board
- Metallic – 40 gauge skinny copper
- Metallic Leather-based
- Metallic Poster Board
- Shimmer Paper
- Sparkle Paper
- Tooling Leather-based 2-Three oz. (0.eight mm), 4-5-oz. (1.6 mm), 6-7 oz. (2.Four mm)
- Vinyl Document
I put a number of of those supplies to the take a look at and had numerous outcomes. You’ll want to learn on in case you are considering of engraving any of those supplies in your Cricut.
Foil Poster Board
I wished to begin with among the paper supplies to see what the Cricut engraving tip would do on these. I had used each the scoring wheel and deboss tip on foil poster board, so I attempted engraving as properly.
The outcomes had been horrible! The Cricut engraving instrument truly rips and tears the paper because it runs throughout it. You may see an up-close view of the harm within the image under.
I had principally the identical outcome with kraft board as properly. The paper was torn fairly than engraved.
Now chipboard will not be on the record of suitable supplies however I gave it a strive as properly. I had the very same outcome because the above two supplies. I’m going to say that the Cricut engraving tip doesn’t work properly with any paper supplies. You’re a lot better off with the deboss tip if you wish to add one thing to paper.
Now for some supplies the place the Cricut engrave instrument truly labored properly! The acetate had a very cool impact. I truly appreciated it a lot better than utilizing the deboss on the identical materials. I did add some ink to the engraving within the picture under so you possibly can see it a bit higher.
When it got here to debossing and the leather-based, I used to be not pleased with the outcomes in any respect! You may see these within the left within the picture under. However the Cricut engrave tip labored like a allure! You may see the engraving on the precise within the picture under. I beloved this impact and might see this used on all types of tasks.
So, what about supplies that the deboss instrument wouldn’t even work on? I did a submit on easy methods to reduce acrylic right here and now it’s time to engrave it as properly! The Cricut engraving instrument works nice on acrylic and I even reduce this piece out as properly. The 2 of those strategies mix to open up a ton of crafting potentialities.
I shared easy methods to reduce copper together with your Cricut right here however now that there’s an engraving choice it’s even higher! The look of copper is wonderful and now I can engrave and reduce customized items. I can see this one as a Christmas decoration through the holidays.
You may’t reduce aluminum together with your Cricut Maker however you’ll be able to engrave it. The Cricut engraving tip works nice on this materials! I used a 5×7 sheet that was painted black. The engraving tip makes the silver of the metallic present by way of for an incredible impact. You can then body this piece for a cute piece of artwork that’s all your individual.
Need the reduce recordsdata for these tasks?
If you need the reduce recordsdata for something proven above, you could find these under.
Do you want the Cricut engraving tip?
That is the large query. Do you want this new tip on your Cricut Maker? I might say in case you are primarily doing paper crafts, persist with the deboss tip. If you wish to department out into different supplies, the Cricut engraving instrument is a superb addition to your machine. If you happen to love the look of tasks just like the copper and aluminum above, the engrave tip is admittedly the one solution to get that look!
I hope this helps reply just a few of the questions you may need when trying on the Cricut engrave instrument. Now that you know the way to make use of the Cricut engraving instrument, what tasks will you make with it? Make sure to be part of our Fb group and share your success. You can too submit any questions you’ve gotten there as properly.
Love this submit on the engraving tip for the Cricut Maker and need extra concepts? Attempt the hyperlinks under!
Success! Now test your e-mail to obtain your copy of the information!