It is a sponsored dialog written by me on behalf of Cricut. The opinions and textual content are all mine.
Provides wanted to make this DIY framed cork board:
Some hyperlinks beneath could also be affiliate hyperlinks which implies that you don’t pay anymore, nevertheless, a small fee will go to this web site.
So, have you ever been out there for an EasyPress 2? This machine is by far one in all my favorites for doing all of my iron-on crafts. In order for you extra data on the EasyPress itself, attempt the hyperlinks beneath.
Now, what’s so particular about this bundle? Nicely, watch the video beneath to see!
So superior proper? The bundle contains the next:
- Cricut EasyPress 2 Machine in Rose
- Cricut EasyPress Mat
- Unique pre-cut iron-on designs
- four sheets of iron-on supplies
It’s actually an excellent bundle and if you happen to don’t already personal an EasyPress, I might extremely advocate it. You may get it at your native JOANN retailer or on-line right here.
Cork Board DIY Adorning Video
Need to see simply the way to make this DIY cork board on video? Simply watch beneath!
Can’t watch the video or missed a number of the steps? Then simply observe together with our tutorial beneath!
Portray Your Items
Begin by portray the body of your cork board. That is non-compulsory however I feel it makes it look a bit extra completed. You need to use a scrap piece of paper to masks off the cork whereas portray.
Paint all the way in which across the exterior. Chances are you’ll want a few coats of paint. Simply you’ll want to enable to dry in between coats and fully earlier than persevering with along with your DIY cork board.
Additionally, you will want to color the wooden discs that you’ll use to your customized thumbtacks. Paint each the highest and sides. I didn’t paint the again as it is going to be in opposition to the cork board when in use.
Once more, these could require two coats of paint so you’ll want to enable to dry in between coats. You want these to dry fully earlier than including any vinyl.
Reducing the Vinyl and Iron-on with Your Cricut
You’ll then want to chop your items in your Cricut machine. You’ll find the minimize file by clicking right here.
Lower the thumbtack items from vinyl in two colours. It would be best to you’ll want to resize these items to suit the wooden discs you might be utilizing earlier than chopping.
Then minimize the items for the DIY cork board from warmth switch vinyl. Bear in mind to reflect these earlier than chopping and place the iron-on shiny facet down in your mat.
As soon as the whole lot has been minimize, it would be best to use weeding instruments to weed away all extra.
Weed across the exterior of your designs in addition to the facilities of any letters.
Learn how to Make Customized Thumbtacks
Now it’s time to pull the whole lot collectively. We’re going to begin with the customized thumbtacks with inspirational phrases.
Place a vinyl circle on high of the painted wooden discs.
Then use switch tape so as to add the phrases to every one.
Use scorching glue so as to add a thumbtack to the again of every disc.
Proceed till you could have a bunch of customized thumbtacks to your DIY cork board.
Including Warmth Switch Vinyl to Cork
Now it’s time to do some cork board DIY adorning. As soon as your iron-on has been weeded, trim the service sheet as shut as attainable to your design with some scissors. Then lay out your items in your cork board.
You have to the Cricut EasyPress so as to add these items to your cork board. Lookup the time and temperature on the Cricut Interactive Information for cork. Set the time and temperature in your EasyPress and permit it to warmth up till it beeps.
You have to to guard the cork floor from the warmth of the EasyPress as properly. You need to use the Cricut Iron-on Protecting Sheet or some parchment paper for this.
Lay the protecting protecting over your iron-on and cork board then put your EasyPress on high. Hit the “C” button to start out the countdown timer. Press down with agency stress on the deal with. As soon as your time is full, transfer the EasyPress to the subsequent space. It’s okay to overlap areas throughout your presses.
After getting pressed all areas, verify to see if the iron-on has fully adhered. If it hasn’t, then simply repeat the urgent course of. Proceed this till you may take away the service sheets out of your designs.
As soon as your whole iron-on is caught and your service sheets have been eliminated, your DIY cork board is full and able to hold on the wall.
Make sure you add your customized thumbtacks to finish this DIY framed cork board.
I added them to my DIY letter board equipment in addition to the printable labels on my shelf organizer.
Workplace Group for a Mother Boss Like You
The three initiatives work completely collectively in my craft room however they might additionally work in a house workplace. I’m at all times in search of methods to remain organized as an entrepreneur. Working for residence is tough y’all. There are such a lot of distractions and having a spot to work that’s properly organized is not less than half the battle.
I talked a little bit bit about quitting my job to pursue my goals in a earlier put up. It was fingers down the most effective resolution I’ve ever made each for my enterprise and for our household. Nevertheless, working from residence will be difficult. If you end up challenged in a work at home place, channel your inside boss babe and use initiatives like these to arrange your area. You’ll not remorse it!
With Mom’s Day simply across the nook, it’s the good time to seek out the “fearless” entrepreneur that could be lurking within you. The Cricut Discover Air 2 in Wild Rose would possibly simply aid you just do that. This machine is all about feminine empowerment and discovering the most effective in you! I selected #selfmade as my hashtag however you may choose from a number of designs that come proper with the machine.
So, if you’re a #selfmade entrepreneur and wish to exhibit your type in your house workplace, give these enjoyable Cricut initiatives a attempt.
Cute group is my jam in relation to my workspace. My total residence could also be stuffed with neutrals however I want a shiny and cheerful place to spend my work day.
Plus, including iron-on to a DIY cork board is simply concerning the coolest challenge round. Who wants a plain jane cork board? Not you!
Use our design to make your individual DIY framed cork board or make up an entire new design. I’m simply infatuated with the Natalie Malan designs so you may be seeing a number of extra of these round right here I’m certain.
Are you a #fearless boss babe? Let your self shine with this cute cork board in colours to match your private home workplace.
Customized thumbtacks with inspirational saying go a protracted method to lifting my spirits each day as properly.
So, if you happen to discover working from residence arduous some days, take my recommendation.
Create an area that’s enjoyable and all your individual for a lift to your artistic soul. You can be so glad you probably did!
Need to win a rose Cricut EasyPress?
Are you able to win your individual bundle! You may enter utilizing the rafflecopter widget beneath. Good luck! Do not forget that solely these 18 years of age or older are eligible to win. US residents solely and void the place prohibited. Winner may have 48 hours to reply earlier than one other winner is chosen. Winner will likely be introduced within the widget beneath.
a Rafflecopter giveaway
So, do you want extra DIY cork board concepts? Strive the hyperlinks beneath!
Success! Now verify your electronic mail to obtain your copy of the information!