DIY

DIY Cork Board with Cricut Iron-on

Make a DIY cork board by adding heat transfer vinyl with your Cricut machine! A quick and easy way to organize your home office! #cricut #cricutmade #office #bossbabe
Making a DIY cork board has by no means been simpler! Do you know that Cricut iron-on works nice on cork? You’ll be able to customise your personal DIY framed cork board in minutes with this system. I discover {that a} cork board is an effective way to prepare my workspace. Actually, I’m placing this challenge with just a few others I made to each arrange and enhance my craft room. Are you able to create your personal DIY cork board organizer? Make sure you enter to win the Cricut EasyPress under so you are able to do simply that!
It is a sponsored dialog written by me on behalf of Cricut. The opinions and textual content are all mine.

Make a DIY cork board by adding heat transfer vinyl with your Cricut machine! A quick and easy way to organize your home office! #cricut #cricutmade #office #bossbabe

Provides wanted to make this DIY framed cork board:

Some hyperlinks under could also be affiliate hyperlinks which implies that you don’t pay anymore, nonetheless, a small fee will go to this website.
Supplies to make a DIY cork board including heat transfer vinyl to put on the cork

So, have you ever been out there for an EasyPress 2? This machine is by far one among my favorites for doing all of my iron-on crafts. In order for you extra information on the EasyPress itself, attempt the hyperlinks under.
Now, what’s so particular about this bundle? Nicely, watch the video under to see!

So superior proper? The bundle contains the next:

  • Cricut EasyPress 2 Machine in Rose
  • Cricut EasyPress Mat
  • Unique pre-cut iron-on designs
  • four sheets of iron-on supplies

Cricut EasyPress 2 Rose Bundle
It’s actually a terrific bundle and if you happen to don’t already personal an EasyPress, I might extremely advocate it. You will get it at your native JOANN retailer or on-line right here.

Cork Board DIY Adorning Video

Need to see simply the best way to make this DIY cork board on video? Simply watch under!

Can’t watch the video or missed a few of the steps? Then simply observe together with our tutorial under!

Portray Your Items

Begin by portray the body of your cork board. That is elective however I feel it makes it look a bit extra completed. You should use a scrap piece of paper to masks off the cork whereas portray.
how to paint a framed cork board


Paint all the way in which across the exterior. It’s possible you’ll want a few coats of paint. Simply you should definitely enable to dry in between coats and fully earlier than persevering with along with your DIY cork board.
Adding paint to the frame of a cork board
Additionally, you will want to color the wooden discs that you’ll use on your customized thumbtacks. Paint each the highest and sides. I didn’t paint the again as it is going to be in opposition to the cork board when in use.
paint small wood circles white

Once more, these could require two coats of paint so you should definitely enable to dry in between coats. You want these to dry fully earlier than including any vinyl.
Adding paint to small wood rounds

Reducing the Vinyl and Iron-on with Your Cricut

You’ll then want to chop your items in your Cricut machine. Yow will discover the minimize file by clicking right here.
Cutting vinyl on the Cricut Explore Air 2 Wild Rose


Lower the thumbtack items from vinyl in two colours. You’ll want to you should definitely resize these items to suit the wooden discs you might be utilizing earlier than chopping.
Cutting vinyl with a Cricut machine to make a DIY framed cork board
Then minimize the items for the DIY cork board from warmth switch vinyl. Keep in mind to reflect these earlier than chopping and place the iron-on shiny facet down in your mat.
How to add heat transfer vinyl to the Cricut mat

As soon as every thing has been minimize, it would be best to use weeding instruments to weed away all extra.
Weeding heat transfer vinyl for a Cricut project
Weed across the exterior of your designs in addition to the facilities of any letters.
Weeding the centers of letters of Cricut iron-on

How you can Make Customized Thumbtacks

Now it’s time to pull every thing collectively. We’re going to begin with the customized thumbtacks with inspirational phrases.
Making custom thumb tacks with Cricut vinyl
Place a vinyl circle on prime of the painted wooden discs.
Adding vinyl to wood rounds then gluing on thumb tacks
Then use switch tape so as to add the phrases to every one.
Adding inspirational words to thumb tacks
Use scorching glue so as to add a thumbtack to the again of every disc.
Using hot glue to add custom wood pieces to the top of thumbtacks
Proceed till you may have a bunch of customized thumbtacks on your DIY cork board.
Custom thumbtacks to put on a DIY cork board made with the Cricut machine.

Including Warmth Switch Vinyl to Cork

Now it’s time to do some cork board DIY adorning. As soon as your iron-on has been weeded, trim the service sheet as shut as attainable to your design with some scissors. Then lay out your items in your cork board.
How to add heat transfer vinyl to cork
You will want the Cricut EasyPress so as to add these items to your cork board. Lookup the time and temperature on the Cricut Interactive Information for cork. Set the time and temperature in your EasyPress and permit it to warmth up till it beeps.
Heat transfer vinyl hexagons added to a cord board
You will want to guard the cork floor from the warmth of the EasyPress as properly. You should use the Cricut Iron-on Protecting Sheet or some parchment paper for this.
Parchment paper used to cover iron-on when adding to a DIY cork board
Lay the protecting protecting over your iron-on and cork board then put your EasyPress on prime. Hit the “C” button to start out the countdown timer. Press down with agency strain on the deal with. As soon as your time is full, transfer the EasyPress to the subsequent space. It’s okay to overlap areas throughout your presses.
Using the Cricut EasyPress 2 in Rose to add heat transfer vinyl to cork.
After getting pressed all areas, test to see if the iron-on has fully adhered. If it hasn’t, then simply repeat the urgent course of. Proceed this till you may take away the service sheets out of your designs.
Peeling back carrier sheet from iron-on that has been added to cork.
As soon as your entire iron-on is caught and your service sheets have been eliminated, your DIY cork board is full and able to grasp on the wall.
Custom cork board made with heat transfer vinyl cut with the Cricut.
Make sure you add your customized thumbtacks to finish this DIY framed cork board.
DIY cork board ideas using your Cricut machine.
I added them to my DIY letter board equipment in addition to the printable labels on my shelf organizer.
decorating a momboss office with your Cricut machine

Workplace Group for a Mother Boss Like You

The three tasks work completely collectively in my craft room however they’d additionally work in a house workplace. I’m all the time on the lookout for methods to remain organized as an entrepreneur. Working for residence is difficult y’all. There are such a lot of distractions and having a spot to work that’s properly organized is a minimum of half the battle.
Custom office organization ideas with your Cricut machine for a craft room or girl boss office
I talked a bit bit about quitting my job to pursue my goals in a earlier put up. It was fingers down the perfect resolution I’ve ever made each for my enterprise and for our household. Nevertheless, working from residence will be difficult. If you end up challenged in a do business from home place, channel your inside boss babe and use tasks like these to prepare your house. You’ll not remorse it!
office decor and organization with your cricut explore air 2
With Mom’s Day simply across the nook, it’s the good time to search out the “fearless” entrepreneur that could be lurking within you. The Cricut Discover Air 2 in Wild Rose may simply enable you do exactly that. This machine is all about feminine empowerment and discovering the perfect in you! I selected #selfmade as my hashtag however you may choose from a number of designs that come proper with the machine.
Cricut Explore Air 2 Wild Rose #selfmade
So, in case you are a #selfmade entrepreneur and need to showcase your fashion in your house workplace, give these enjoyable Cricut tasks a attempt.
Adding a DIY cork board to an office for a boss baby with your Cricut machine.
Cute group is my jam in relation to my workspace. My total residence could also be full of neutrals however I want a vivid and cheerful place to spend my work day.
DIY framed cork board with the Cricut machine and heat transfer vinyl
Plus, including iron-on to a DIY cork board is simply in regards to the coolest challenge round. Who wants a plain jane cork board? Not you!
Adding decorations to a cork board with heat transfer vinyl and a Cricut Explore Air 2.
Use our design to make your personal DIY framed cork board or make up a complete new design. I’m simply infatuated with the Natalie Malan designs so you can be seeing a number of extra of these round right here I’m positive.
Custom cork board for a woman's office with iron-on and a Cricut
Are you a #fearless boss babe? Let your self shine with this cute cork board in colours to match your private home workplace.
how to add heat transfer vinyl to a cork board
Customized thumbtacks with inspirational saying go an extended approach to lifting my spirits every day as properly.
Custom thumbtacks with vinyl and a Cricut Explore Air 2
So, if you happen to discover working from residence exhausting some days, take my recommendation.
Making office decor with a Cricut machine including a DIY cork board
Create an area that’s enjoyable and all your personal for a lift to your inventive soul. You’ll be so glad you probably did!
Fun office decor in pink hues with the Cricut Explore Air 2 in Wild Rose

Need to win a rose Cricut EasyPress?

Are you able to win your personal bundle! You’ll be able to enter utilizing the rafflecopter widget under. Good luck! Keep in mind that solely these 18 years of age or older are eligible to win. US residents solely and void the place prohibited. Winner could have 48 hours to reply earlier than one other winner is chosen. Winner shall be introduced within the widget under.
a Rafflecopter giveaway
So, do you want extra DIY cork board concepts? Attempt the hyperlinks under!
Success! Now test your e mail to obtain your copy of the information!

Leave a Reply

Your email address will not be published. Required fields are marked *